Go Greener Tips

Pelletizing is a process where a pelletizer is used to reduce the volume plus increase the density of a raw matter. Many different raw materials can be processed in a pelletizer, for various diverse purposes and uses. For example the pelletizing of animal feed has become very wide spread, through the advantages of precise feed formulas, along with better storage along with rationing.
The wood pelletizing industry over recent years has continued to grow, as well as will continue into the future. Biomass pellet heating is a convenient, low maintenance method to utilize a low carbon energy to replace existing gas as well as oil heating systems.
Pellets are a compressed for of the original raw material, the raw matter in question can be almost any natural matter. Pellets have a uniform shape, size along with density. The density of a pellet is far higher than the original raw material. This is one of the key reward of of pellets, in terms of increased energy density, lower shipping costs in addition to smaller storage space.

Learn more about Wood Pellet

Biomass is any cellulose unrefined matter which can be used as a fuel source. Wood includes biomass along with biomass waste, grasses plus straws as well as other energy crops such as hemp. Almost all wood materials can be processed via a pelletizer into pellets. In terms of pelletizing wood, each wood material has diverse characteristics. Some biomass materials can produce pellets without the necessitate for additional binders. Yet for some wood, binders are required to produce pellets of adequate quality in addition to density.
Also not all biomass pellets have the same incineration characteristics. Biomass pellets in general make little ash and no clinker formations, on the other hand this is not true of all wood pellets. Also some biomass pellets are corrosive.

Read more about Small Pellet Mills

At PelHeat we develop small scale mobile pelletizers. To aid general knowledge of the pellet construction process we have developed this guide. The guide covers the pelletizing process in a straightforward ten step process, through raw material preparation as well as pellet compression. Pellets have been used for over a century for unlike applications and purposes. Essentially yet all pellets are based on the same principles, plus are produced for the same reward. Raw materials for example biomass chips, straws along with grasses in their loose form have very little value. One of the key reasons for this, is in their raw form they are very hard to deal with, so it is very difficult to design systems around these resources. For the animal feed industry for example they choose pellets as they can make definite feed blends easily in addition to then distribute the feed much cheaper in the compressed form of a pellet. It also makes it much easier to measure out a specific amount each day to feed to the animals, plus storage space for the feed is also dramatically reduced. Recently pellets have been used as a replacement to conventional heating fuels. There are quite a lot of reasons for this which are explained below.

For more information on Pellet Making

2 Responses to “Pelletizing And Carbon Emissions And Alternative Fuel”